Electrochemical Corrosion Behavior of Zr-Sn Alloy in aNitric Acid Environment
Author of the article:CHENG Shaoyang1,2 , WEI Tongyu1 , YAN Baohui1
Author's Workplace:1. Xi'an West New Zirconium Technology Co., Ltd., Xi'an 710016, China; 2. Zhonghe (Tianjin) Machinery Co., Ltd., Tianjin 300399, China
Key Words:Zr-Sn alloy; electrochemical corrosion; microstructure; passivation film; nuclear spent fuel reprocessing
Abstract:
In view of the stringent requirements for structural materials in extremely corrosive environments with
high-temperature concentrated nitric acid in the reprocessing of spent nuclear fuel, Zr-xSn alloys (x=0, 0.5, and 1.0, wt.%)
were selected as the research material in this work. The effects of the Sn content on the microstructure and electrochemical
corrosion performance of the alloys in a nitric acid solution were systematically investigated. Optical microscopy (OM)
and scanning electron microscopy (SEM) were employed to characterize the microstructural features of the samples.
Electrochemical measurements, including potentiodynamic polarization and electrochemical impedance spectroscopy (EIS),
were carried out to evaluate the corrosion resistance, and the surface morphologies of the corroded samples were further
observed. The experimental results reveal that the addition of tin effectively refines the alloy grains, modulates the size
and distribution of secondary phase particles, and homogenizes the overall microstructure. With increasing Sn content,
the self-corrosion potential of the alloy shifts positively, the passivation interval increases, the corrosion current
density decreases, the film resistance increases, and the corrosion resistance clearly improves. When the Sn content is
0.5 wt.%, the comprehensive corrosion resistance of the alloy is the best. The self-corrosion current density is as low as
2.586 6 ×10-6 A/cm2
, and the film resistance reaches 12 749 Ω/cm2
. The passive film is complete and compact, without
pitting or cracks. The addition of Sn can significantly inhibit the corrosion of the zirconium matrix by nitric acid by refining
the structure, stabilizing the passive film and improving the charge transfer resistance.