ISSN:1000-8365 CN:61-1134/TG
Your Position :Home->Articles Online->2026 Vol.47 No.10

View Full-text
Static Behavior and Quantitative Description Model of GH4169Alloy During Two-pass Hot Deformation
Author of the article:ZHOU Ziyu1, DENG Hao2, YANG Jingyun2, LIU Lang2, SUN Zongshuai2,WU Tianmo2, GUO Lianggang1
Author's Workplace:1. State Key Laboratory of Solidification Processing, Northwestern Polytechnical University, Xi'an 710072, China; 2. DeyangWanhang Die Forging Co., Ltd., China National Erzhong Group Co., Deyang 618099, China
Key Words:GH4169 alloy; double-pass hot deformation; static/meta-dynamic recrystallization; grain growth; predictionmodel for static behavior
Abstract:
To clarify the significant influence of static behavior during the double-pass hot deformation process of aGH4169 alloy on subsequent processing, through double-pass hot compression and static grain growth experiments, thestatic softening behavior (including static recrystallization and subdynamic recrystallization) and static grain growthbehavior of this alloy were clarified. The results indicate that when the first-pass deformation is low (8% ), staticrecrystallization dominates the softening mechanism, whereas at higher deformation (30%), metadynamic recrystallizationbecomes the primary mechanism. The static softening fraction increases with extended interval holding time and elevatedholding temperature, indicating greater material softening. When the interval holding temperature exceeds 1 000 ℃, graingrowth accelerates significantly because of the dissolution of the δ phase, which weakens its pinning effect on the grainboundaries. On the basis of the experimental data, Avrami models for static/metadynamic recrystallization and a static graingrowth model were established, and good agreement between the predicted and experimental values is obtained.