Investigation into the Effects of Pt Wire Core Supports onThin-walled Single-crystal Turbine Blades
Author of the article:CHEN Haotian1,2, LI Ke3, CHEN Senhong2, ZHU Xiaolong1, ZENG Long2,XIA Mingxu1, WANG Xiaoshan1
Author's Workplace:1. School of Materials and New Energy, Ningxia University, Yinchuan 750021, China; 2. School of Materials Science andEngineering, Shanghai Jiao Tong University, Shanghai 200240, China; 3. AECC South Industry Company Limited, Zhuzhou412000, China
Key Words:Pt; core supports; thin-walled single-crystal turbine blade; microstructure; structural protrusion; dendriteorientation deflection
Abstract:
The effects of Pt wire cores on the microstructure, elemental segregation, and local stress concentration inthin-walled single-crystal turbine blades were investigated. Comparative analysis was conducted between blades with andwithout Pt wire cores. The results indicate that the Pt from the cores dissolves and diffuses into the matrix, influencingthe microstructure. The primary dendrite arm spacing increases from approximately 277.6 and 299.0 μm to 293.4 and311.2 μm, respectively, while the γ/γ′ eutectic phase content increases from 2.2% and 2.3% to 2.7% and 4.6% ,respectively. However, no significant impact on the γ′ strengthening phase is observed. Notably, Pt diffusion exacerbateselemental segregation, particularly for refractory elements such as Re and W. Additionally, the insertion of Pt wire coresinduces structural protrusions and localized stress concentrations, accompanied by dendrite orientation deflection. Thesefactors may trigger recrystallization defects during subsequent heat treatments, adversely affecting blade performance. Tomitigate these risks, removing the Pt wire cores prior to heat treatment is recommended.