ISSN:1000-8365 CN:61-1134/TG
Your Position :Home->Articles Online->2026 Vol.47 No.10

View Full-text
Effect of Rolling Temperature on the Microstructure andProperties of Cu/MoCu/Cu Laminated Composites
Author of the article:CHEN Yanglan1,2, ZHU Lei1,2, MAO Mengchen3, FENG Li1,2, HE Jiawei1,2, LI Bingyan1,2,WANG Yufei4, ZHA
Author's Workplace:1. Shaanxi Province Modern Equipment Green Manufacturing Collaborative Innovation Center, Engineering Research Centerof Conducting Materials and Composite Technology, Ministry of Education, Shaanxi Province Key Laboratory for ElectricalMaterials and Infiltration Technology, School of Materials Science and Engineering, Xi'an University of Technology, Xi'an710048, China; 2. Shaanxi Laboratory of Advanced Materials, Xi'an 710021, China; 3. Xi'an ChaoJing Technology Co., Ltd.,Xi'an 710299, China; 4. Xi'an Seal Electronic Material Technology Co., Ltd., Xi'an 710201, China
Key Words:Cu/MoCu/Cu laminated composites; hot rolling; shear bands; microstructure; thermophysical properties
Abstract:
High-performance thermal management materials play a critical role in microelectronic devices. Cu/MoCu/Culaminated composites have attracted extensive attention because of their unique combination of a low coefficient of thermalexpansion (CTE) and high thermal conductivity (TC). However, the fabrication process significantly affects themicrostructure morphology and interfacial characteristics, which influence the overall performance of the composites. In thisstudy, the effects of rolling temperature on the microstructure and TC of Cu/MoCu/Cu composites were systematically investigated. The results indicate that the grain size of the Cu layers increases with increasing rolling temperature, whereasshear band structures in the MoCu layer gradually form and subsequently fragment, hindering the transport paths ofelectrons and heat flow. Compared with the infiltration of the Cu/MoCu/Cu composite, recrystallization occurs in the Culayers at a rolling temperature of 700 ℃, and a “chain-like” continuous shear band structure is formed in the MoCu layer.This leads to the establishment of a synergistic construction consisting of a “Mo load-bearing framework” and “Cuheat-conduction pathways”, achieving the coordinated optimization of high TC and low CTE.