当前位置：首页 > 过刊浏览->2019年40卷第3期
烧结温度和保温时间对钴基合金组织与性能的影响
Effect of Sintering Temperature and Time on Microstructure and Properties of Cobalt-based Alloys
浏览(1817) 下载(7)
- DOI:
- 作者:
- 吕松涛 苏义祥 尹章轩 崔燕平 梁腾文 杨美美
LV Songtao;SU Yixiang;YIN Zhangxuan;CUI Yanping;LIANG Tengwen;YANG Meimei
- 作者单位:
- 郑州电子信息职业技术学院交通运输系 兰州理工大学材料科学与工程学院
Department of Transportation,Zhengzhou Professional Technical Institute of Electronic & Information,Zhengzhou 451450,China;School of Materials Science and Engineering,Lanzhou University of Technology,Lanzhou 730050,China
- 关键词:
- 钴基合金粉末 烧结温度 保温时间
cobalt based alloy powder sintering temperature holding time
- 摘要:
- 配制一定比例的钴基合金粉末,利用光学显微镜、布洛硬度仪等分析手段研究烧结温度和保温时间对钴基合金微观组织和硬度的影响。结果表明,烧结温度为1 290℃,保温时间为2.5～3.0 h时,钴基合金具有最佳的微观组织且硬度最高。The effect of sintering temperature and holding times on microstructure and properties of cobalt-based alloy were investigated by OM and Brinell-Rockwell hardness tester. The results show that the optimal sintering temperature and holding time for cobalt-based alloy are 1 290 ℃ and 2.5~3 h, respectively, and cobalt-based alloy has the best microstructure and mechanical properties.