当前位置：首页 > 过刊浏览->2020年41卷第5期
某盘盖产品改进铸造工艺的数值模拟分析
Numerical Simulation Analysis of Improved Casting Process of a Plate Cover Product
浏览(1592) 下载(7)
- DOI:
- 作者:
- 李尉榕 于赟 丁杰 赵金权
LIWeirong;YU Yun;DING Jie;ZHAO Jinquan
- 作者单位:
- 江苏理工学院材料工程学院 常州华德机械有限公司
School of Materials Engineering,Jiangsu University of Technology,Changzhou 213001,China;Changzhou Huade Machinery Co.,Ltd.,Changzhou 213001,China
- 关键词:
- 数值模拟 缩松缺陷 补缩措施
numerical simulation shrinkage defects shrinkage of the feeding measures
- 摘要:
- 某盘盖产品因客户要求需改进铸造工艺,采用数值仿真软件对初始工艺方案进行模拟,根据模拟结果分析缺陷存在的部位,并提出相应的补缩措施。最终得出可行的工艺方案来指导实际生产,从而提高效率。
Due to the customer's requirement to improve the plate cover product casting process,the numerical simulation software was used to simulate the initial process plan,and then the defects were analyzed according to the simulation results,and the corresponding shrinkage measures were proposed.Finally,a feasible process plan is obtained to guide the actual production,so as to improve the efficiency.