当前位置：首页 > 过刊浏览->2020年41卷第5期
某型薄壁镁合金铸件铸造工艺设计
Casting Method of a Thin Wall Casting Part
浏览(1649) 下载(6)
- DOI:
- 作者:
- 陈涛 张飞场
CHEN Tao;ZHANG Feichang
- 作者单位:
- 西安航空制动科技有限公司 中国船舶重工集团公司第十二研究所
Xi'an Aviation Brake Technology Co.,Ltd.,Xingping 713106,China;No.12 Research Institute,China Shipbuilding Industry Corporation,Xingping 713102,China
- 关键词:
- 高强度镁合金 优质铸件 工艺设计 改进方案
high strength magnesium alloy premium casting process planning improvement scheme
- 摘要:
- 根据薄壁壳体镁合金铸件结构特点及使用要求,结合高强度ZM5镁合金的工艺特性,分析了薄壁壳体铸件铸造工艺要点,研究了试制过程中出现的若干工艺问题及其解决措施。结果表明,生产的ZM5合金薄壁壳体铸件各项技术要求指标达到设计要求,铸件合格,按期交付客户。
According to the structural characteristics and application requirements of thin-walled shell magnesium alloy castings and the process characteristics of high-strength ZM5 magnesium alloy,the key points of casting process of thin-walled shell castings were analyzed.Some technological problems in the process of trial production and their solutions were studied.The results show that the technical requirements of ZM5 alloy thin-wall shell casting meet the design requirements,the casting is qualified,and the casting is delivered to the customer on time.