当前位置：首页 > 过刊浏览->2023年44卷第5期
一种特种汽车铰接件的铸造工艺设计及优化
Casting Process Design and Optimization of a Special Automobile Hinge
浏览(3055) 下载(21)
- DOI:
- 作者:
- 马 静 1 ， 2 ，范世玺 1 ， 2 ，崔新鹏 1 ， 2 ，李 峰 1 ， 2 ，石岳良 1
MA Jing 1,2 , FAN Shixi 1,2 , CUI Xinpeng 1,2 , LI Feng 1,2 , SHI Yueliang 1,2
- 作者单位:
- 1. 北京航空材料研究院股份有限公司，北京 100094；2. 北京市先进钛合金精密成型工程技术研究中心，北京 100000
1. Biamtec Material Co., Ltd., Beijing 100094, China; 2. Beijing Engineering Research Center of Advanced Titanium Alloy Precision Forming Technology, Beijing 100000, China
- 关键词:
- ProCAST ；精密铸造；钛合金；数值模拟；缩孔
ProCAST; precision casting; titanium alloy; simulation; shrinkage cavity
- 摘要:
- 铰接件是特种汽车的关键零部件，在其铸造成形过程中，铰接件根部总会出现大的缩孔缺陷，严重影响铸件质量。 本文基于 ProCAST 软件建立铰接件铸造成形仿真模型，分析铰接件充型、凝固过程，研究不同尺寸、形状的冒口对铰接件缩孔分布的影响规律。 模拟结果表明，根据铸件结构设计的随形冒口对铰接件的缩孔消除影响最大，缩孔较初始方案减小了 94.8%, 铸件根部的缩孔由 2.11 cm 3 减小到 0.11 cm 3 ，缩孔近似全部消除。 进行 X 射线探伤，探测到的缩孔缺陷与模拟结果一致，可为后续实际生产提供指导。
Hinged parts are the key components of special vehicles. During the casting process, large shrinkage holes always appear at the root of the hinged parts, which seriously affects the quality of the castings. In this paper, based on ProCAST software, a simulation model of the casting forming of the hinged part was established, the filling and solidification process of the hinged part was analysed, and the influence of the risers with different sizes and shapes on the distribution of the shrinkage cavity of the hinged part was studied. The results show that the shape riser has the greatest influence on the extraction of shrinkage holes of hinged parts. The shrinkage holes are reduced by 94.8% compared with the initial process, and the shrinkage holes at the root of the casting are reduced from 2.11 cm 3 to 0.11 cm 3 . The detected hole defects are consistent with the simulation results, which can provide guidance for subsequent actual production.