当前位置：首页 > 过刊浏览->2022年43卷第11期
精密铸造陶瓷型壳用硅溶胶研究进展
Research Progress on Colloidal Silica for Ceramic Shells in Investment Casting
浏览(3262) 下载(14)
- DOI:
- 作者:
- 李 倩 1 ，刘智鹏 2 ，赵 巍 3 ，李 勇 1 ，张 强 1 ，沈 滨 1 ，周悍坤 1 ，吕
LI Qian1 , LIU Zhipeng2 , ZHAO Wei3 , LI Yong1 , ZHANG Qiang1 , SHEN Bin1 , ZHOU Hankun1 , LYU Yongl
- 作者单位:
- 1. 北京航空材料研究院 先进高温结构材料重点实验室，北京 100095；2. 大连理工大学 莱斯特国际学院，辽宁 大连 124000；3. 空军驻北京地区第六军事代表室，北京 100013；4.北京科技大学 材料科学与工程学院，北京 100083
1. Science and Technology on Advanced High Temperature Structural Materials Laboratory, Beijing Institute of Aeronautical Materials, Beijing 100095, China; 2. Leicester International Institute, Dalian University of Technology, Dalian 124000, China; 3. The Sixth Military Representative Office of Airforce in Beijing, Beijing 100013, China; 4. School of Materials Science and Engineering, Beijing University of Science and Technology, Beijing 100083, China
- 关键词:
- 硅溶胶；精密铸造；凝胶；陶瓷型壳
colloidal silica; investment casting; gel; ceramic shell
- 摘要:
- 硅溶胶是纳米二氧化硅颗粒在水或有机溶剂中的分散溶液，具有高黏度、高热稳定性以及环境友好等优
点。 精密铸造用陶瓷型壳由耐火材料、黏结剂(硅溶胶)等材料组成。 本文综述了各种硅溶胶的制备方法，包括透析法、硅
溶解法、离子交换法和溶胶-凝胶法。 通过调节硅溶胶的浓度、颗粒尺寸、pH 值、温度、离子浓度等，控制凝胶化行为、干
燥时间和制备的外壳强度。 同时，对影响凝胶化的各种因素进行了评述，并对硅溶胶的未来发展趋势进行了讨论。
Colloidal silica is defined as a dispersed suspension of silica nanoparticles with the advantages of high viscosity, high thermal stability and environmental friendliness. The ceramic shell in investment casting is mainly composed of refractory material and binder (colloidal silica). In this review, various methods for preparing colloidal silica (including electrodialysis, silicon dissolving, ion exchange and sol-gel process) have been displayed and discussed. The gelation behavior of colloidal silica (including gelation/drying time and shell strength) is controlled by regulating the colloidal silica concentration, colloidal size, pH value, temperature, and ion concentration. Meanwhile, other influencing factors for gelation have been reviewed, and future trends of colloidal silica in ceramic shells have been discussed.