当前位置：首页 > 过刊浏览->2022年43卷第10期
气孔缺陷及含障碍物的气泡动力学 三维相场模拟研究
Gas Porosity Defect and Three-Dimensional Phase-Field Simulation of Bubble Dynamics in a Microchannel with Obstacle
浏览(2957) 下载(6)
- DOI:
- 作者:
- 张 昂 1 ，李闯名 1 ，苏东泊 1 ，杜经莲 2 ，刘 峰 2 ，蒋 斌 1
ZHANG Ang1 , LI Chuangming1 , SU Dongbo1 , DU Jinglian2 , LIU Feng2 , JIANG Bin1
- 作者单位:
- 1. 重庆大学 国家镁合金材料工程技术研究中心，重庆 400044；2.西北工业大学 凝固技术国家重点实验室，陕西 西安 710072
1. National Engineering Research Center for Magnesium Alloys, Chongqing University, Chongqing 400044, China; 2. State Key Laboratory of Solidification Processing, Northwestern Polytechnical University, Xi'an 710072, China
- 关键词:
- 镁合金；气孔；气泡动力学；障碍物；相场模拟
magnesium alloy; gas porosity; bubble dynamics; obstacle; phase-field simulation
- 摘要:
- 镁合金铸造过程中气孔缺陷难以避免，而气孔源于未从金属液中逸出的气泡。本文以 Mg-Al 合金为研究对
象，分析了铸态 Mg-30%Al(质量分数)合金的气孔缺陷特征。 通过将气泡在熔体中的动力学行为抽象为在含障碍物微通
道内的动力学行为，以及采用保守相场-格子玻尔兹曼模型，研究了气泡在含障碍物微通道内的演变规律。 通过引入形
状参数对气泡形状进行量化，研究了障碍物尺寸对气泡动力学的影响。 结果表明，随着障碍物宽度的增大，气泡会由被
障碍物分裂变为被阻挡，并在后续上升过程中，呈现不同的动力学特征
Gas porosity, which is difficult to avoid during the solidification of magnesium alloys, originates from gas bubbles that do not escape from the melt. In this work, the gas porosity defect in the Mg-30%Al (mass fraction) alloy is characterized, and the bubble dynamics in the melt are investigated by abstracting such dynamics as bubble rising behavior in a microchannel with the obstacle. A conservative phase-field lattice-Boltzmann model is employed to solve the bubble dynamics, and two shape parameters are introduced to characterize the bubble shape. The effect of the obstacle width on the bubble dynamics is quantified. The results show that the bubble changes from being split by the obstacle to being blocked with increasing obstacle width and presents different dynamic characteristics in the subsequent rising process.