当前位置：首页 > 过刊浏览->2022年43卷第7期
铸渗法制备陶瓷颗粒增强金属基复合材料的研究进展
Research Progress on Ceramic Particle Reinforced Metal Matrix Composites by Infiltration Casting Method
浏览(3897) 下载(11)
- DOI:
- 作者:
- 孙书刚 1 ，钮昊天 1 ，张 悦 1 ，史义明 2 ，陈铁军 2 ，刘佳利 2 ，罗景楠 2 ，钱兵
SUN Shugang1 , NIU Haotian1 , ZHANG Yue1 , SHI Yiming2 , CHEN Tiejun2 , LIU Jiali2 , LUO Jingnan2 ,
- 作者单位:
- 1.南通理工学院 机械工程学院，江苏 南通 226002；2.华能国际电力股份有限公司 海门电厂，广东 汕头 515000；3.南通 高欣耐磨科技股份有限公司，江苏 南通 226011
1. School of Mechanical Engineering, Nantong Institute of Technology, Nantong 226002, China; 2. Haimen Power Plant of Huaneng Power International Inc., Shantou 515000, China; 3. Nantong Gaoxin Antiwear Technology Co., Ltd., Nantong 226011, China
- 关键词:
- 陶瓷颗粒增强；金属基复合材料；陶瓷预制体；铸渗法；润湿性
ceramic particle reinforcement; metal matrix composite materials; ceramic preform; infiltration casting method; wettability
- 摘要:
- 综述了铸渗法制备陶瓷颗粒增强金属基复合材料的成分设计原则。 从陶瓷预制体制备工艺、铸渗法制备陶
瓷颗粒增强金属基复合材料制备工艺及改善陶瓷颗粒与金属基体润湿性 3 个方面阐述了复合材料的研究进展。 概述了
陶瓷颗粒增强金属基复合材料应用现状，并对未来发展进行了展望。
The composition design principle of ceramic particle reinforced metal matrix composites prepared by infiltration casting method was reviewed. In this paper, the research progress of ceramic particle reinforced metal matrix composites is reviewed from three aspects: preparation technology of ceramic prefabrication system, preparation technology of ceramic particle reinforced metal matrix composites by infiltration casting method, and improvement of wettability between ceramic particle and metal matrix. The application status of ceramic particle reinforced metal matrix composites was analyzed, and the development trend and direction were prospected.