当前位置：首页 > 过刊浏览->2020年41卷第8期
球化包芯线熔爆特性研究
Research on Melting Explosion Characteristic of Nodularization Cored Wire
浏览(2098) 下载(12)
- DOI:
- 作者:
- 闫启栋 齐朋展 徐锦锋 李建锋 王迎战
YAN Qidong;QI Pengzhan;XU Jinfeng;LI Jianfeng;WANG Yingzhan
- 作者单位:
- 禹州市恒利来合金有限责任公司 西安理工大学材料学院
Yuzhou Henglilai Alloy Co.,Ltd.,Yuzhou 461670,China;School of Materials Science and Engineering,Xi'an University of Technology,Xi'an 710048,China
- 关键词:
- 球化包芯线 喂丝速度 铁液温度 熔爆深度
nodularization cored wire wire feeding speed molten iron temperature melting explosion depth
- 摘要:
- 采用人工插入法研究了球化包芯线前端在铁液中的动态熔爆行为,探索了铁液温度和喂丝速度与熔爆深度之间的相关规律。结果表明,在包芯线熔爆过程中,熔爆前端始终存在高浓度镁的蒸发区域。在铁液温度一定的条件下,随着喂丝速度的增大,熔爆深度呈非线性增大。当喂丝速度一定时,随着铁液温度的升高,熔爆深度趋于减少。在实验研究的基础上,建立了铁液温度-喂丝速度-熔爆深度之间的理论预测模型。The dynamic melting behavior of nodularization core wire front end in molten iron was studied by manual insertion method.The correlation between molten iron temperature and feeding speed and the depth of fusion burst was explored.The results show that there is always a high concentration of magnesium evaporating zone in the front-end of cladding wire.When the temperature of molten iron is fixed,the depth of melting explosion increases nonlinearly with the increase of feeding speed.When the feeding speed is constant,the melting depth tends to decrease with the increase of molten iron temperature.On the basis of experimental research,the theoretical prediction model of molten iron temperature-feeding speed-melting depth is established.